Magnemount Model MMSA-38
The Magnemount (Patent No.7,624,957) is a cost-effective non-penetrating magnetic mount designed for use on steel water towers.
We are now supplying cable/cable tray coax supports (Patent Pending) based on the Unistrut framing system coupled with the patented Magnemount non-penetrating mounting system.
Utilizing Unistrut's 12 gage 304 grade stainless steel framing, coupled with the Magnemount non-penetrating mounting system, we are providing a solution to carrying cables across and down steel water tanks. The item number is CT1000-24-U-2. No longer will it be necessary to rely on epoxy for a non-penetrating solution, when the Magnemount mounting system has the track record to reliably hold your cables until you are ready to move them. Lengths of 24" of Unistrut are stocked, but any length is available. The Magnemount mounting system is attached to the Unistrut and requires no adjustments. All you have to do is unwrap the package, place the supports, and attach the brackets for a clean installation that has the longevity of 304 grade stainless steel. Placement should be every 4 feet or less on horizontal surfaces and 3 feet or less on vertical surfaces.
Another option is to attach the cable trays to the Unistrut if the cables need to be enclosed (Item numbers CT1000-24-U-3 or -5). The -3 or -5 stand for the length of the 304 grade stainless steel HHCS. This option has a customer controlled height adjustment on each magnet to allow a close fit on the cble tray ends - even on curved surfaces.
Another new cable holding Magnemount is item number MMSA-38. We attach a CommScope model SA-38 adapter to our Patented Magnemount mounting system. A single high strength magnet can hold up to 3 runs of cable using 3/4" snap-ins. Placement should be every 4 feet or less on horizontal surfaces and 3 feet or less on vertical surfaces.
Our basic model MB (item #MB36-2), and our adjustable model MA (item #MA30-2), have a 24" square footprint and can hold a 5.5 Sq. Ft. antenna mounted 4 feet high on the mast in a 100MPH wind. An upgrade to the rotational torque holding capacity (Patent Pending) was made in Feb., 2009. With this upgrade, the maximum mast deflection is less than 0.5 degree in all directions in an 80MPH wind. The testing lab report can be viewed at the following link.
model mb and ma test report
The Magnemount MASS is available with a 67" long mast (item# MASS48-2) the Cell Phone Panel model (item# MASSCELL108-2) and the XL model (item# MASSXL131-2) . They all have a 72" square footprint. The MASS can hold a 6 Sq. Ft. antenna 8 feet high on the mast in a 100MPH wind. The testing lab report can be viewed at the following link.
model mass test report
Our MASS XL model has a 12 foot long mast. It can hold a 5.5 square-foot antenna in a 100 MPH wind.
Click here for load test reports. This report analyses the individual components.
Click here for a load capacity report. This report concludes that there is a 6.4X safety factor with 2 antennas specified.
Click here for a seismic test report. This report confirms that the Magnemount is in compliance with AC156.
Click here for the Magnemount warranty
Descriptive letter of all models and capacities. Pricing is also listed on this link.
View drawings of all of the Magnemount models.
For more information, please David at 330-963-7909, or e-mail to